How to Find A Plumber You Can Rely On

When you develop plumbing issues in your home, chances are that you become frustrated. This is because you do not know how to fix it usually. Although major plumbing problems usually require the help of professionals, simple problems can be fixed by you. The following article will give you easy plumbing tips.

Ensure that everyone in your household knows how to turn off the main water supply. Alternatively, knows how to contact someone who can. In the event of a burst pipe or other water-related emergency, you should immediately turn off the water to prevent flooding, structural damage, and a sky-high water bill.

Don’t Freak Out in an Emergency

Have a large bulletin board in the kitchenette or lounge, which you could write reminders for yourself of things you need to do or bills you need to pay. Emergency phone numbers, contacts, brochures, postcards and notes to yourself, look better arranged on a bulletin board and should not clutter your refrigerator or other appliances.

You can check your toilet for leaks by adding a few drops of food coloring, Kool Aid or some coffee grounds to the water in the toilet’s tank (not the water in the bowl). Check the water in the bowl after a half hour or so. If any of the coloring agent is visible in the water in the bowl, the tank is leaking, and you will have to have it repaired.

A Clear Drain Saves Hassles

If you have a clogged drain, don’t use cleaning chemicals to try to clear the clog. These harsh chemicals can corrode your metal pipes leading to leaks and broken pipes over time.

In the far north west corner of the country we have some very cold winter nights which can cause problems if your pipes are not protected. If you live in an older home and think your pipes might be at risk for freezing, allow your faucets to trickle slightly, especially if your pipes are located in a crawlspace. The running water prevents the pipes from freezing as quickly as they would otherwise. If you do end up with a leak or a burst pipe and want it fixed permanently, click here for a dependable plumber

Prevent Freezing Problems

Frozen pipes from harsh winter weather is a problem that no-one wants, so plan now to winterize your exterior faucets and pipes against freezing conditions. A simple way to accomplish this is to find the exterior water shut-off valve located inside your home (often located in the basement). Turn off the water valve to stop water flow, and then open up the outside faucets to drain out any water that has collected. Be sure to turn off the outside water faucets tightly after the water has drained out. Take in any hoses you may have outside so they don’t crack from the cold weather.

Avoid using hard cleaners on your toilets, such as drop-in cleaner tabs in the tank. When these tabs are almost completely dissolved, what’s left of the tab gets washed into the bowl. This can then end up clogging the toilet’s port holes, preventing the toilet from flushing properly. It can take months for this debris to finish dissolving in those holes.

Keep the Drains Clean

If you ever get clogged bathtub or shower drain, you could feed it baking soda, one cup’s worth, with a cup of vinegar to chase it. Plug the opening or cover it with a cloth while the chemical reaction takes place. After letting it sit for a few moments, clear the pipes out with a gallon of boiling water. This should help clear your pipes of accumulated soap and hair scum. If the clog was something worse then you could try using a plumbers snake.

Plumbing Tips for Drains

Clean your dryer’s lint trap. This can prevent various problems, including a fire. Inspect your lint trap every so often for tears or holes that could cause lint to go into your pipes, this could cause clogs or other problems you will have to deal with.

Don’t do Patch Work

Have you tried patching your pipe with the store-bought patching kits only to have that section of your plumbing continue leaking? Replacing the damaged pipe is a more permanent solution than patching. First, you must shut off the main water valve, and drain the water from the damaged section. Cut out the damaged section of the copper pipe, leaving about an inch of extra pipe on both sides of the damaged area. Remove corrosion from inside the pipes with a wire brush. Apply flux to the replacement pipe and the remaining pipe. Slide the piece of replacement pipe into place with couplings. Apply solder all around the joint, and use a propane torch to solder the replacement section into place.

Tricks for the Toilet

If you have a crack in your toilet tank, you can sometimes fix this with an epoxy resin. However, it is very difficult to keep up with this type of maintenance, and the best bet may be contacting the supplier and ordering a new tank to be installed in your bathroom. Nevertheless, keeping some epoxy resin on hand for emergencies is a good idea.

Believe it or not, it is not a very good idea to use a plunger if your toilet is clogged. Plungers just push whatever is stuck deeper into the drain. Instead, it is a better idea to use a closet auger. It will do a better job and is affordable.

As was stated above, it is normal to become frustrated by plumbing problems your home may have. But, these problems can usually be easily fixed, if you know how. Use the tips that this article has provided to you in order to get started in plumbing repairs as soon possible! If not we have listed a good plumber in Vancouver who guarantees their work and don’t charge an arm and a leg for it.

This entry was posted in Home Owner and tagged . Bookmark the permalink.